Forum LAMS for Tech-Heads - General Forum: Re: Re: Re: Re: LAMS 2.0.1 is out!


 
Search: 

16: Re: Re: Re: Re: LAMS 2.0.1 is out!
In response to 15 03/14/07 05:54 AM
[ Reply | Forward ]
The attached file goes in
C:\lams\jboss-4.0.2\server\default\deploy\lams.ear\lams-central.war\flashxml\monitoring\pt_BR_dictionary.xml

Fiona

Posted by Fiona Malikoff

Attachments:
17: Re: Re: Re: Re: Re: LAMS 2.0.1 is out!
In response to 16 03/14/07 05:58 AM
[ Reply | Forward ]
Final posting for the night hopefully.

The attached file goes in

C:\lams\jboss-4.0.2\server\default\deploy\lams.ear\lams-central.war\flashxml\wizard\pt_BR_dictionary.xml

Both of these pt_BR_dictionary.xml files replace the existing pt_BR_dictionary.xml files in the two directories.

Fiona

Posted by Fiona Malikoff

18: Re: Re: Re: Re: Re: Re: LAMS 2.0.1 is out!
In response to 17 03/14/07 06:02 AM
[ Reply | Forward ]
The file attachment failed. Maybe I can't upload two files with the same name.

The attached file needs to go in as C:\lams\jboss-4.0.2\server\default\deploy\lams.ear\lams-central.war\flashxml\wizard\pt_BR_dictionary.xml

so you will need to rename this attached file.

Fiona

Posted by Fiona Malikoff

Attachments:
20: Re: Re: Re: Re: Re: Re: Re: LAMS 2.0.1 is out!
In response to 18 03/14/07 07:22 AM
[ Reply | Forward ]
Hi Fiona,

I made all the changes you suggested and then loaded an sequence into the design screen. I then exported it in both LD and LAMS formats without apparent problems.

I then tried to import it back in from the exported files.

When I tried to import the IMS LD format export file I got the following error message:

=========================================================

Import tool content
Learning design import failed

The reason is [org.lamsfoundation.lams.learningdesign.service.ImportToolContentException]

=========================================================

However, importing the LAMS format file seemed to work successfully.

Just a FYI,
Tim.

Posted by Timothy Allen

21: Re: Re: Re: Re: Re: Re: Re: Re: LAMS 2.0.1 is out!
In response to 20 03/14/07 04:46 PM
[ Reply | Forward ]
Tim,

Thanks for the kind words in your earlier posting.

The LD is only "export" at the moment. You can't import it back in.

If you want to import it in, you have to use the LAMS format.

So your problem is not unexpected.

But we obviously don't say that on the screen, or you wouldn't have tried it. :->

I've just raised a task to add a clarification message on the screen in LAMS 2.0.2.

Thanks for the feedback.

Fiona

Posted by Fiona Malikoff

Reply to first post on this page
Back to LAMS for Tech-Heads - General Forum